Friday, November 26, 2010

Bonneville Night Races

In the late 1970s (this picture is from 1979) we used to have a night race at Bonneville Raceways on the West side of the Salt Lake valley. This was, to us, like racing supercross at night, in front of a crowd, in what was basically a stadium with bleachers, concessions and paved pits. No wonder this was a popular place.

The track was relatively simple with limited space on the infield of the stock car oval to work with. There were lights, of course, and turns, jumps, whoops and some short straights to whip it up to speed before braking for the next turn as shown. I am squeezing the front drum brake on my 1979 RM125 with a 4-finger grip, such was the pre-disc brake braking performance of the time.

Saltair

Back in the day we had some great tracks to ride. That is, before suburbia encroached. In the spring and fall we could jam at "56", the Gun Club or "Sweden", but when it got hot and dry, there was only one place to be - at the beach!

At the shore of the Great Salt Lake we had an awesome track with lots of turns, some small bumps and jumps, and tacky conditions even in the middle of the summer.

The 1978 Maico was a very solid bike, the source of it's great manners was a cromoly frame and swingarm, and stout 35mm forks. The shocks that came stock on that bike were just OK (Corte Cossa remote reservoir shocks) but it was the geometry and construction of the chassis that made that bike great.


Also the rocket motor. I had my cylinder ported, and with the stock Bing carb, that bike was fast. The explosive powerband combined with the ability to "speed shift" was a Maico bonus. This was a banner year for Maico, and watching their "factory" pro racers ride production bikes was amazing. Steve Stackable, Gaylon Mosier, Danny "Magoo" Chandler, Carlos Serrano, and the Europeans like Hans Maisch, Adolf Weil and Herbert Schmitz all rode the same basic bikes we did, albeit a lot faster. We emulated them in every way we could, all in pursuit of the motocross dream.

1978 Practice

Practicing on a loamy day at the Gun Club. My 1978 Maico was so badass, I felt like Hans Maisch.

The Veteran

By 1978 I was feeling like a Vet. I had been racing since 1973 and was 18 years old. I had this fantasy about doing stunts on my Maico, thank goodness I never attempted to: jump off the roof; ride over the top of the overpass on Wasatch Blvd and the freeway; ride up the side of a steep hill and do a 180; or ride alongside the freeway and jump the exit ramps. I had dreams about giant cliff jumps and wheelies down the hallways of my school.

Mix and Match

This is taken at one of my very first "pro" races, somewhere in Idaho. I was riding my 1977 RM125 and sporting Lancer leathers and a Jofa mouthguard (open-face helmets were the norm) that I trimmed for some reason, and had a Champion sticker on my visor and gas tank. I probably never used a Champion spark plug, at least that I noticed, of for that matter any of the products that were advertised all over my bike, helmet or van. Most of the stickers we chosen for looks or for their reference to something cool or pro.

Those RM125s from the late 1970s were really good bikes, having been developed by the actual professional racers and brought to market on a very short development cycle. The 1977 RMs were wel-balanced with some very good forks and remote-reservoir shocks that kept the ride smooth and controlled. The handling was very predictable, and the great thing about 125s was, you knew exactly how fast to go: wide open all the time.

Motoqua

We were lucky to have so many great places to ride within a reasonable distance. Most of the places we rode our dirt bikes were just fields where we and others had made natural-terrain tracks to practice. Within an hour's drive from home we had The Gun Club, Parleys Gulch, Manning, Widowmaker, Draper (we called it Sweden), Red Sands (North Salt Lake), Ogden, Saltair (the beach), Knolls (towards Wendover) and others.

But the staple of our riding and racing had to be "56" or Motoqua. Located on 5600 West and 2200 South, this sandy moto paradise was, at one time, a State recreational vehicle park. There was a motocross track, a flat track and lots of trails to wander. Many days were spent there riding, racing, practicing, breaking, wrenching and BSing. The sandy soil was shifty and dusty when it was hot, but when it rained, the corners turned to loam, the bumpy straights and jumps were a playground for speed and air time. Great fun.

This picture is taken from a 125 Amateur (intermediate) race in 1977 at "56". It was one of those tacky, moist days we lived for. Somebody on a Honda is pulling the holeshot (too fast to make the photo though). Right on his tail is Randy Wynhof (#188) on another Honda, and a Suzuki rider who I believe was from Tooele (not sure)... Others in this picture are Lance Lundgren, Bryan Haslam, Randy Thomas, Gary Groscost, Kelly Skeen and my brother, Scott Clawson. That's a packed field, a big crowd of spectators, perfect weather and fun track all in one image. Enjoy.

Crash and Burn Part 2

This is taken at "56" (Motoqua) in around 1976 in a 125 Novice race. My friend Kelly has just laid his bike down right in the path of Victor Archuleta who is doing his best not to loop out. Can't remember the outcome, be probably rode it out.

Victor Archuleta was the brother of another racing buddy, Johnny Archuleta, who was a top expert at the time. Johnny and Victor were (and are still, I'm sure) good guys. Victor was sort of our local racing scene's "Magoo", a wild rider with unbounded energy and enthusiasm for twisting the throttle. I remember him as always super pumped are ready to race, even in practice.

One time we were riding at the Gun Club (There were several tracks around the old Holladay Gun Club in Salt Lake) on the gravely pit down near the road on Wasatch Blvd., and we noticed Victor was practicing his jumping off a drop-off jump. This particular drop-off was short and steep, favoring a cautious approach. He was making runs at the jump, faster and faster. You could hear him scream his 125 on one approach making us all look up just to witness a giant case-out and a "Crash and Burn" of titanic proportions. He went over the bars in a giant cloud of dust, his bike cartwheeling. Poor Victor had to be carted away in an ambulance that day with a broken hip. I felt sorry for him as he was riding his brand-new YZ125 and had his Hallman goatskin leathers all shiny and pristine. I knew he was excited, as were we all, about racing, and a new bike has an intoxicating effect. Until you biff.

Crash and Burn

Back in 1975 my friends and I were high school kids, racing bikes and sluffing school to go riding, reading Dirt Bike Magazine in class, and generally living the life. Here is a picture we took up at the old Gun Club track and submitted to Dirt Bike's "Crash and Burn" special. It got published!

1970s Motocross Pix


It's great how old photos jog your memory. While scanning some bike pictures for this blog, I came across some old photos from the 1970s that include some of the older bikes previously listed. Here are some choice pictures and the memories they bring up.

The first one here is from the Widowmaker Hillclimb, circa early 70s. Must have been around 1972 or 1973. This is the old original funky hillclimb that was held every year on the hillsides of Draper, Utah. I remember this event being a "must attend" happening for all hippies and bikers (and hippy and biker wannabe's like me) at that time. Good times.


Thursday, November 25, 2010

1980 Yamaha YZ125

I found this image of a 1980 Yamaha YZ125 on the internet,
as I did not own this bike long enough to get any pictures of me on the bike. The bike I briefly owned was purchased from my friend, Steve sometime in 1980 after I had practically raced the wheels off my 1979 RM125. That bike served me well to say the least, but the times were marching along, and the 1980 Yamaha had a motor that could not be denied.

This was a very fast 125 as I found out in one of my last races on my Suzuki, and at the hands of a very fast Yamaha rider, the former mini pilot who dusted me at Roosevelt, Utah. The Roosevelt track was hard and blue-grooved, with an uphill start, sweeping corners, some long straights and one nasty off-camber straight that just went along the side of a ridge. I remember that I was wringing the throttle for all I was worth that day, trying to coax some more speed out of my trusty Suzuki.

The funny thing is, I felt like an old veteran racing against the next generation of 125 experts at that time. I was only 20 years old and had been racing since 1973, but nontheless after being trounced by one of the fast new kids coming up I was starting to feel not so young.

I had the opportunity to buy this bike from Steve, who had done some modifications to the motor and I was super pumped to get a faster bike. Unfortunately, the bike never ran right and I ended up returning it to Steve (blown up, I believe). I think it had an air leak somewhere in the cases or around the intake for the case reed valve induction. Steve, of Marty Smith replica fame, was a tinkerer by nature and he always had modified bikes, trick parts and super clean stuff. We all admired our friend, for even after the Marty Smith era ended, he still always was super stylish and classy with his shiny stuff and flashy riding style.

As with all things mechanical, things were ever evolving. Getting better, faster and more reliable. The 125 motocross bikes we raced in the 1970s and 1980s were special in that they were the result of a determined evolutionary push by the motorcycle manufacturers of the day to prove new technology and one-up each other in the arena that was the expanding motocross scene in the U.S.

It's hard to believe today, with the awesome bikes that are currently raced, just how eccentric and flawed these old 125s were. Those of us who sampled these racers, in the quest for trophies and bragging rights, faced the prospect of sorting through the pros and cons every year. And we chose every year, and raced, crashed, won, lost, broke and fixed as we went. A great time to have raced all things considered!

Sunday, June 14, 2009

1979 Suzuki RM125

The Japanese motorcycles you could buy back in the “dinosaur days” of motocross in the late 1970s were evolving at a fast rate, and works technology was being incorporated into the production bikes you could purchase at your local dealer. As mentioned earlier, every year there was one or two standout bikes that would dominate racing. Make the wrong choice and you would struggle all year with poor starts and poor finishes.

Pity the poor fools that bought off brands like Ammex (yikes) or Carabela. There was plenty of variety
through the 1970s, Husky and Maico mixed it up with bikes from Spain, Czechoslovakia, Sweden, and even Mexico. But the tide was turning on these old bikes and in their place in the winner's circle was, increasingly Japanese made.

The 1979 Suzukis were very similar in appearance, to the bitchen' factory race bikes of the dominant team on the world championship Grand Prix circuit, Suzuki. With great riders like the highly revered Belgian Roger DeCoster, dentist Gerrit Wolsink of Holland, Gaston Rahier and Andre Vromans, both from Belgium, and world championships, race wins, and the trickest bikes at the time, Suzuki was on a roll.

So how could you resist the 1979 RM125? Underneath the stock shovel-shaped fenders (the first thing I changed on my bike) was, for all intents and purposes, the same as Roger D. was slaying the world champs on. The entire bike was newly-redesigned and they nailed it. Punchy, solid, fast and balanced would describe this bike.

I left mine mostly stock, with the exception of the aforementioned fenders (Preston Petty “Mudder” on the front, and an aftermarket reproduction 1978 RM125 rear fender), some mild cylinder porting (exhaust ports raised slightly and the intake shaped and polished), the head milled for more compression, grippy Metzeler tires front and rear, some Oury waffle grips, and little else.

The suspension and everything else I just left alone. This was the beginning of bikes that did not need a lot of modifications to win races. And in 1979 the gates were full of these little yellow Suzukis. Yes, you could still win on other brands, but my memory tells me this was “the” bike to have that year.

We used to race on Thursday nights at the old Bonneville Raceways, west of Salt Lake City. They had made a small motocross track on the interior of the stock car oval, supplied lighting and the racers came in droves to race like crazy in front of family and friends. There were ample bleachers for the spectators, a refreshment stand, and enough dirt, turns, jumps and straightaways to keep us coming back for more every week. The black and white picture above is me, sometime in 1979, racing at Bonneville Raceways, wringing the throttle for all the juice—and fun—I could get. I was plate number 23 that year, a number that has stuck with me by choice (and sometimes providence) ever since.

Tuesday, June 9, 2009

Tuesday, May 26, 2009

1978 Maico 250 Magnum


The Maicos of the early 1970s were some of the best motocross bikes you could buy at the time, the competition being bikes like Bultaco, CZ, Husqvarna, Penton (KTM), early Japanese models and others. All motorcycles from that era had flaws and limitations, but the Maicos were good all-arounders — with a tractable powerband, good handling, cool machined aluminum parts, and the legendary Maico forks.

As the 1970s progressed, the European brands pretty much kept pace with the fast-moving Japanese onslaught, albeit on more of a 2- or 3-year design cycle rather than a yearly one like Honda, Suzuki, Yamaha, and Kawasaki practiced. Long travel suspension went from 6 inches in the early 1970s to 10.5 inches by 1978. Lots of bikes had long travel, but the trick was to get the good handling and sharp cornering of the older, lower bikes combined with effective long travel.

Enter the 1978 Maico 250 Magnum. Maico had done a complete redesign of their motocross bikes for 1978, using features and parts that were just like the factory works bikes of Germans Herbert Schmitz, Adolf Weil, and Hans Maisch (son of the owner of the Maico factory "MAIsch-CO"). We had seen the factory Maicos up close and personal, on a post-high school graduation trip to Sears Point in Northern California to see the fall Trans-Am race. All the big heroes were there, the most electrifying being the cool Belgian, Roger DeCoster. Just his presence was enough to render 4 moto-crazy high school kids speechless and stupid.

We were all witness to much lawlessness and frivolity on this trip, but one lasting memory is seeing the Maico team that was there with American factory riders Steve "Short Stack" Stackable, and "Gassin'" Gaylon Mosier. Stackable rode a good race in the 500cc International class against some of the fastest riders in the world that day, but I will never forget the ride Mosier put in to hold off wild-riding Bob "Hurricane" Hannah in the 2nd moto. Both riders were swapping around the steep course, skidding in all the off camber corners and deflecting off every rut and bump. Hannah was closing fast, but Mosier turned the throttle wide open and executed some wild riding of his own to barely hold off Hannah at the flag.

The Maico I bought from Don Gibbs at Utah Sportcycle was for all intents and purposes the same bike ridden by the factory riders. At least the basic castings, frame dimensions, engine basics (excluding modifications like porting or boost ports) and most parts were the same. It had an all-new engine that featured some of the smallest engine cases we had ever seen. The clutch was housed in a compact, sand-cast side case, and used a double-row chain to transfer power. It used a piston port top end with radial cooling fins on the head, like the old Maicos.

The red frame was cromoly steel tubing, welded up in a double cradle configuration which allowed the exhaust to exit directly from the front of the cylinder, a feature that was thought to give more power. It had a banana-shaped steel swingarm that allowed the shocks to give long travel in the back with the bike sitting lower for better cornering and handling. The countershaft sprocket was positioned very close to the swingarm pivot, allowing for less free play in the final drive chain. This was a great solution to a problem with early long-travel bikes: the dreaded chain slap.

The famous Maico forks graced the front, the same sand-cast aluminum, leading-axle lowers as the earlier Maicos but with 10.5 inches of travel, machined triple clamps, and upsized 38mm tubes. The shocks were Corte Cossa (an Italian brand) and had remote reservoirs intended to provide extra cooling capacity for the hard-working dampers. A works replica lightweight aluminum gas tank, painted red to match the rest of the bike, some solid looking sand-cast aluminum conical hubs, Metzeler tires, and lots of machined pieces made for one cool bike.

The 1978 Maico was a very fast 250. One thing that helped hard acceleration was the fact that you could just shift through the gears without letting off the throttle or using the clutch. The shift lever, if nudged at the right RPM, would snick into the next highest gear with no hesitation or loss of forward momentum. The turning was exceptionally predictable and the bike could skate around corners faster than anything else at the time. Good stuff.

The magic of the 1978 Maico Magnum was that it melded the old handling traits, cottage industry feel, and raw-hewn "works" parts with the advanced performance being achieved by technology's march.
In a time of rapid changes, Maico was defiant of the inevitable—at least for a few great years—before succoming to the tides of change and economics.

Saturday, January 3, 2009

Friday, January 2, 2009

1977 Suzuki RM125













One of the unique things about racing 125s in the 1970s, was that choosing the right bike for that year was a lot more critical than it is nowadays. Witness the poor louts that stubbornly held onto their Honda CR125s too long. It was bad enough in 1976 when the RMs came into their own, but 1977 was Suzuki's time to grab another gear while the competition was fumbling.

Those of us who had jumped on the yellow bandwagon in 1976 snapped up the new 1977 models and never looked back. There was still a faction of Honda loyalists who had modified their bikes to the max, all sorts of innovations arose from the need to keep up. There were engine and suspension kits all over the place that summer (remember the "Skunk Works" suspension?), other makes toeing the line, pumped-up kids and their dads with trophies on their minds, and there was us, moving up the ladder of local Utah racing and living in a world of pre-mix, Metzelers, adrenaline and dust.

The 1977 RM125s were fast bikes in stock form, had evolved rear suspension with revised remote reservoirs, and a beefy front end that featured a well-damped leading axle KYB fork. This new front end created a more balanced ride and predictable handling, which combined with the solid mid-range motor and decent reliability, was a tough package to beat. We were loving it to the tune of trophies and upward mobility, moving up to Amateur and then Expert. Applying black numbers to white backgrounds was the first sign you had made it to the Experts.

The 125 Expert class at that time was loaded with talent, with some riders specializing in the little bikes, and other established pros racing 2 classes. It was not an easy time to be coming into the class with riders like John Greenway, Stan Wynhof, Jim East, R.S., Mike O'Driscoll, Johnny Archuleta, Dave Meacham, Cody Lewis, Greg Madsen, Randy Yates, Eldon Copier, and the infamous Danny Lechtenberg. This was the generation of disciples that followed in the boot steps of the pioneers of Utah pro racing like Bob Plumb and Gary Neff.

The established riders were not about to make room the the front for newcomers, as I found out in one of my first Expert races at Brigham City. The Brigham City track featured a fast start straight that was slightly downhill, sweeping into a scary-fast left up a gravelly hill. Since I had a fast bike, I was right at the front with Wynhof and Lechtenberg on either side of me. We came into that sweeper 3 abreast and 2 came out, you do the math. I ended up at the bottom of the pile-up (pictured at top) having learned a lesson about the top guys. I spent the rest of the race playing catch up (never did).

In the top picture you can see a stunned Johnny Archuleta (back, left), his Yamaha YZ125 is underneath Robert Borg's modified Honda CR125 (check out his cool Fox air shocks and aluminum swingarm)... we are all wondering what hit us. My bike was mostly stock, but had the head milled for more compression, stock pipe, and white fenders. I had Metzeler tires on most of my bikes, they were more expensive but worth it as they gave good predictable traction even when slightly worn. We are all sporting leather pants and open-face helmets.

That was a fun summer of racing, not too many responsibilities, good friends and sweet bikes. The rivalries we had with other riders added to the intensity, and we learned to respect the competition, at the same time figuring out ways to beat them. We learned to enhance our strengths and exploit their weaknesses
—prepare, show up, ride wide-open and do it all over again next week.

Thursday, January 1, 2009

1976 Suzuki RM125


Things were happening quickly in motorcycle development in the mid-1970s. New technology was being introduced at a rapid pace, all in the pursuit of motocross dominance enjoyed by companies like Honda (and various factories before them).

Sometimes manufacturers would even introduce new models midway through a calendar year, especially in the hyper-competitive 125 class, and we racers were always looking for the "next big thing". It was commonplace to purchase a new bike every year, and sometimes every 6 months, if you wanted to stay competitive. Such was the impact of the emerging mechanical juggernaut of the Japanese quest for sales, pride and company honor.

Of course, we local Utah racers eagerly lapped up the spoils of this technological arms race, laying down our bets on new bikes at dealerships like Honda of Salt Lake, G&L Yamaha, Suzuki of Salt Lake, Plaza Cycle, Utah Sportcycle and others. 1976 was a hard year to choose sides, with Honda fans loathe to give up their little silver bullets, Yamaha loyalists exploiting the monoshock revolution, and Kawasaki riders wringing out their rotary valve KX125s. But many of us were enticed by the new Suzuki RM125, which looked like a copy of the factory "works" bikes ridden by Gaston Rahier and Harry Everts in the World Championship Grand Prix.

It turned out to be a good call. Suzuki had indeed grabbed the 125 class high ground, and we could tell these bikes were something special the first time we fired them up and blasted through the gears. The fat expansion chamber gave off a throaty mid-range burst of power that could be milked to advantage over the winding power curve of the competition. The rear suspension was also superior to what the other manufacturers were offering, with beefy, remote-reservior shocks mounted on a stout banana-shaped swingarm and offering nine-plus inches of controlled wheel travel.

The bike certainly looked the part with a works-replica gas tank, single-downtube frame, the aforementioned banana swingarm, some wide serrated steel footpegs, and a roomy layout that felt stable and relatively balanced. The front fork was of the straight-axle type, and was plush within the parameters of 1976-era performance, but gave the bike a slight front-down stance, the "stink bug" that was left over from the 1975 model bike, which had rear wheel travel exceeding the capabilities of the front suspension.

Sometime late in the year I installed a Marzocchi leading axle fork on my bike, purchased used from our favorite hang out, PF Racing. Since the bike was designed with a straight axle fork, the steering was probably affected in a negative way, but I never noticed. It looked cool, and that was enough for me. And besides, that fork had been used by one of the shop's winning pro riders, the infamous "R.S.", Randy Sargent, who could be seen ripping up on the local pros every weekend at our favorite tracks. PF Racing was the dominant local team at the time, and we wanted to be part of it. It was an exciting place to hang out after school (and sometimes during school) and I met several of my cool friends at that shop.

PF was owned by a guy named Jeff Vombaur, commonly referred to as "V", who was caught up in the passion of racing just like we were. In some ways "V" was ahead of the times in Utah, bringing a Southern California (mecca to the motocross community) vibe to the local scene. He always had the top local pro riders, on the trickest bikes, and travelled to the races in his PF Racing Van (also referred to as the "V"). His love of moto and his contributions to the fun factor at the local races sometimes surpassed his business acumen, the result being bankruptcy and some angry vendors, oh well. The memories of that great time, the crazy people, the rowdy trips and the bikes, races, magazines—the buzz of it all are what matters to us.

"V" is no longer with us, but the feeling remains that we experienced a special time in history with great friends—a little on the edge and loving it—some trick bikes and maybe a six-pack of beer as we invaded small Utah towns, living the life of the crazy motocross racer of the 1970s.

Sunday, December 28, 2008

1974 Husky 250 mag


This was not technically my bike until my uncle gave it to me in 2005. It was my dad's bike for a few years in the early '70s, and I raced it in the 250 novice class a couple of times when, for some reason that escapes me, I was without a bike (a breakdown, perhaps?).

It got sold to my uncle when dad tired of it, and was ridden until it became too dog-eared and rusty, at which time it was put away to wait for resurrection. I always knew uncle Jim had it put away, but was surprised when he called me and offered it to me. I was happy to come haul it off, and now it waits patiently for me to fix it up. It is in remarkably good shape for a 30-plus year old machine, it still has compression...

Husqvarna was one of the big players in the motocross world in the early '70s, and they are one of the few remaining old marques around today. The 1974 250 mag (the "mag" refers to the magnesium engine cases) was a somewhat revolutionary bike at the time: light, powerful and agile. The engine gave a raspy power that was typical '70s 2-stroke — rather abrupt with a substantial mid-range surge and vibrating into a decent top end. It was a man's bike, not like the toys we were racing at the time in the 125 class.

The bike also had another trait Huskys were famous for at the time: the infamous "Husky hop". The short wheelbase coupled with shocks that were mere ornaments possessing rudimentary damping characteristics, made for a handful on the sandy, whooped-out "56" track. This combined with the nasty power and quick steering made for one memorable, arm-pumped race. I lined up in the 250 novice class, pulled the holeshot and flogged out a haggard win. I can't remember the details, nor do I have any pictures, but I do remember the massive arm pump and close calls, swapping and lurching around. A character-builder of a race.

At some point we talked dad into installing a set of longer shocks in an attempt at smoothing out the ride. The stock Husky only has 4 or 5 inches of rear wheel travel, so we bumped that up slightly with a set of Ceriani's on the stock mounting points. It was common at the time to lengthen the swingarm and move the lower shock mounts forward, but we did not perform that particular modification. We did slide the forks down in the triple clamp to compensate for the higher rear stance.

The Husky hop remained, as my dad found out when, after one race, he was super charged-up from watching us kids. He went barreling into the whoops on one of "56's" rough straightaways, all full of piss and vinegar, and sideways he went. It looked like a bomb went off, dust and sand flying, red and silver Husky swapping, a classic "Flying W" that ended badly. A brutal end for both dad and the Husky, as shortly after, dad bought a Suzuki RM250 and never looked back.


Friday, December 26, 2008

1975 Honda CR125 Elsinore


Sometime in early 1975, I became the proud owner of a shiny new Honda 125. It was around this time the Japanese motorcycle manufacturers were ascending to the top of the motocross world, leaving the "old guard" European bikes like Husky, Maico, CZ, Bultaco (and any number of cottage industry makes) in the dust.

It seems that I had shown enough resolve in my pursuit of this racing thing that my dad decided to help me get a more capable bike. The LT100 I started on was a good beginner bike, but its performance was limited, not only in a lack of horsepower, but the soft suspension and wallowy handling was holding me back.

The big heroes of the day were riding Hondas, and some of my friends had already taken the plunge. The CR125 Elsinore had been around since 1973 and was clearly the bike to have in the super-competitive 125 class in motocross. A whole industry had sprung up, providing hop-up parts for these screaming 2-strokes. The starting lines were loaded with modified Hondas, from mild to wild, which usually won the race.

It was not unusual to have 3 full gates of 125 novices racing at any given event in the Utah summers at tracks like the aforementioned "56" and Widowmaker, Manning Cycle Park, Brigham City, Hyrum, Price, Green River, and others. The 125 class was the most popular in racing at that time and besides the dominant Hondas, there were Suzuki TM125s, Yamaha YZ125s, Kawasaki KX125s, and even rare and somewhat over-matched Hodaka Combat Wombats (seriously). It was in these scrambling hordes that my friends and I cut our teeth in the sport, dreaming of success, and emulating our all-time hero Marty Smith.

Marty Smith was the 125 national champion in the early '70s, a Honda factory rider and the embodiment of the stylish Southern California motocross star. We all wanted to be like him. We copied Marty's style in everything we could reasonably afford on a teenager's budget, from the factory-replica jersey, Jofa mouth-guard, Hallman goatskin leathers and Carerra goggles to the fire engine red paint scheme on the little Honda's gas tank. Some people, of course, could afford to be more Marty than others. My friend Steve was a Marty replica in nearly every aspect—up to and including actually looking like Marty himself. My other buddy Kelly, and myself, on the other hand, were slightly less Marty—though not for lack of desire to be so.

Kelly was an awesome factory replica dude, full of enthusiasm for all things Marty but on a slightly tighter budget than Steve. His personal CR125 was Marty-ed out with the requisite red paint—but everything else was dog-eared, worn out, bent, resprayed and coated with dirt and grime ready for another wide-open attempt at chasing the dream in the 125 novices. It was in this milieu of bikes and bodies, red paint, modified shocks and teenage optimism we happily mixed in with riders from Tooele, Price, Ogden, and Provo chasing the dream. Battles were fought over plastic trophies and bragging rights, every pass a grand story to tell, every rivalry fuel for the fire.

It was a fun time to be involved. Exciting things were happening with the bikes: shocks were layed down and moved up on the swingarm, seats were built up high with foam, hand-welded exhaust pipes of every configuration increased power, radial or "porcupine" heads were installed for better cooling, front and rear Metzeler tires for increased traction. The 125 class was the breeding ground for desire and ambition, and the notion that with modifications and ingenuity, a donkey might be made into a thoroughbred. Exciting possibilities were shared and passed around, implemented with varying success, and tried out on the grand stage that was racing in the 1970s.